Fast dry marking paints that are designed for streets and parking lots

They may be ambient, airless, conventional, or heated to accelerate the dry time

Normal dry time is 10 minutes at 77 deg

F

at 50% humidity

These meet or exceed the current VOC regulations and to the requirements of Federal Specification TT-P-01952E Types I and II

Use on cured asphalt, concrete, brick, and other street or highway surfaces

Do not paint on wet surfaces

Dries to a flat finish

Covers approximately 300 to 350 sq

ft

per gallon or approximately 320 lineal ft

with 4" stripe

Do not use brush or roller

Apply with Airless Line Sprayer at 1800 to 2700 P

S

I

with

015 to

019" tip or Conventional Line Sprayer (atomization pressure 20 to 80 P

S

I

) Thin with water up to 12

5% by volume if needed

Clean hands and tools immediately after use with soap and warm water

Flush spray equipment with mineral spirits to prevent rusting of equipment