New and improved interior/exterior, direct to metal (DTM), water-based high gloss acrylic enamel designed for industrial maintenance and construction purposes

Use on machinery, farm implements, fixtures, conveyors, safety equipment, metal, wood, and doors

Provides excellent rust and corrosion resistance

Acceptable for use in federally inspected meat and poultry plants

Use for safety colors for marking in industrial, construction, traffic areas

Surfaces must be clean, dry, and in sound condition

Remove all loose rust, paint, and any contamination to ensure adequate adhesion

For better adhesion, undercoat iron, steel, and aluminum with Do it waterborne primer

Allow a minimum of 6 months to weather galvanized steel before priming and topcoating

Masonry and block surfaces should be clean and dust- and cured for at least 28 days; fill holes with block filler before topcoating

Apply with a synthetic brush, roller, or airless sprayer

Clean up with soap and water

Covers approximately 300 to 350 sq

ft

per gallon

Dries to touch 20 to 45 minutes or to recoat in 4 to 6 hours